Insights and Tips for Assessment Validation: How to Validate Assessments

Insights and Tips for Assessment Validation: How to Validate Assessments

Blog Article

After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.

As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.

We must adhere to the standards by conducting two types of validation.

The primary validation type ensures compliance with the training package requirements for your RTO's assessments.

The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.

This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.

An Overview of the Two Types of Assessment Validation

Clarifying Assessment Validation

As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.

In contrast, post-assessment validation focuses on the implementation, requiring Registered Training Organisations to conduct assessments according to the Principles of Assessment and Rules of Evidence.

In this write-up, we will focus on assessment tool validation.

Steps to Perform Assessment Tool Validation

Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.

When to Conduct Assessment Tool Validation

Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:

- update your resources
- you add new training products on scope
- when course is reviewed against training product updates
- identifying your learning resources as a risk during your risk assessment

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

Choosing Training Products for Validation

Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.

Starting Assessment Tool Validation: What You Need

Educational Materials

To validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.

Learner/student workbook – during validation, check if it's suitable as an assessment tool. Ensure instructions are clear and answer fields are sufficient. This is a common gap.

Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item exist. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Team for Validation

Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.

Collectively, your validation panel must have:

Vocational competencies and industry skills relevant to the unit being validated

Recent knowledge and skills in vocational teaching and learning

Any one of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the next version

Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.

Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.

Principles of Assessment Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.

A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Guidelines Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?

As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.

Fundamental Principles of Assessment
Fairness – Does the assessment process ensure equal opportunity and access for everyone?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment achieve the same results every time, regardless of who conducts the training? Will different assessors consistently make decisions on skill competence?

Evidence Core Rules

Validity – Is the evidence proof that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work belongs to the candidate?

Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?

Despite these being frequently addressed in VET professional development and nationally recognised training, heaps of tools still have problems with these requirements.

To prevent using learning resources that do not address some unit requirements, ensure you adhere to these guidelines:

Be Consistent with Your Teachings

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Carry out each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:

change nappies

bottle preparation, feeding babies from bottles, and cleaning equipment

solid food prep and feeding babies

appropriately respond to baby signs and cues

prepare and settle infants for rest

monitor and support physical exploration and gross motor skills appropriate for the age

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Look Out for Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

Full Compliance or Not Competent

Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further

Every assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are clear and not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kind of information can be included in a work package?

Answers might include:

Needed materials

Relevant expenses

Time span of activities

Allocated duties and responsibilities

If an assessment item demands multiple answers, specify how many answers a student must click here provide. This ensures your assessment is reliable, and the evidence gathered is valid.

This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:

Name a hazard and/or environmental issue in the work area and choose the most effective hazard control hierarchy.

Possible answers can include, but are not limited to:

Weather conditions – isolation of work area, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, engineering controls

People – isolating, engineering, administration

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolating, engineering, administration

Equipment or machinery – isolation, engineering, administrative controls

Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.